Produse pentru • i (569)

Lubrication of chains, fringe bearings, hinges, joints, clamping and drying frames or slideways at higher temperatures and loads For conveying systems under radiation heat in painting, stoving and drying systems Advantages and benefits Highly effective due to finest, homogeneous MoS₂ distribution in the oil Emergency running properties through MoS₂ at dry running Outstanding adhesion and lubrication effect with no tendency to drip or dry out Silicone-free For best adhesion, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610 or OKS 2611 universal cleaner. With a brush, drip oiler or by immersion or using a suitable automatic lubrication system, apply a sufficient quantity to the locations to be lubricated. Allow excess to drip off. Allow OKS 350 to soak in before operating. Observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions Operating temperature:-30 °C → +250 °C Density (20 °C):0.90 g/ml Viscosity (40 °C):240 mm²/s Coefficient of friction SRV (DIN 51834-2, 50 °C):µ = 0.125

Lubrication wherever good penetration capacity is the only possibility for relubrication, for example at joints, hinges, linkages, levers and guides Lubrication of machine elements subjected to moisture, for example at conveying systems, packaging machines, automatic filling machines, etc. Chains in a dusty environment Advantages and benefits Light-coloured High lubrication effect due to optimum product formula Good creep properties, thus easy penetration even in narrow, hard-to-reach lubricating points Good lubricating and pressure absorption capacity Excellent corrosion protection Good wear protection, also in comparison to higher-viscosity oils without solid lubricants Broad range of uses in all maintenance sectors Also available as spray version OKS 671 Operating temperature:-30 °C → +60 °C/150 °C Density (20 °C):0.82 g/ml Viscosity (40 °C):18 mm²/s Coefficient of friction SRV:µ = 0.08 Wear SRV:0.002 mm³ Salt spray test:> 150 h

For low-viscosity OKS products in 25 l canisters Advantages and benefits Resistant to OKS products Thread, internal:Ø 55.5mm ±0.3 Thread, external:Ø 60.3mm ±0.3 Weight:54.5g

Lubrication of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements, for example with screwed, mating or bayonet connections made of high-alloy steel or non-ferrous metals Surface separation of temperature-stressed threaded connections, for example at combustion engines and turbines Corrosion protection at screws, pins, bolts, flanges, spindles and fits For stainless-steel connections Advantages and benefits Economic product solution for users who previously used a wide variety of pastes Resistant to hot and cold water and also to most acids and lyes Excellent corrosion protection Contains Moₓ-Active for increased performance Metal-free Also available as spray version OKS 2501 Operating temperature: -40 °C → +200 Press-fit:µ = 0.10, no chatter Four-ball test rig (welding load):3,600 N Thread friction (M10/8,8):µ total = 0.12

OKS 4240 is a special grease for the lubrication of ejector pins in the plastics industry. Lubrication of ejector pins in the plastics industry at high temperatures and slow movements Lubrication of rolling and friction bearings at extremely high temperatures and aggressive operating conditions Advantages and benefits Extraordinarily good resistance to vapours occurring during plastic processing Good plastic and elastomer compatibility Excellent temperature resistance Lowest evaporation losses, also at high temperatures ensure long regreasing intervals Good media resistance Also suitable for fast-runing bearings thanks to low share of solid lubricants Operating temperature:-20 °C → +300 °C NLGI grade:2 DN factor (dm x n):350,000 mm/min Base oil viscosity (40 °C):440 mm²/s Four-ball test rig (welding load):4,800 N

Dry lubrication of the most varied materials sliding on top of or rubbing against each other (such as metals, wood, ceramic, rubber, and also adhesives or paintable plastics) Anti-stick coating of seals or sealing surfaces of all kinds to prevent sticking-on To cure the squeaking noises of soft on hard materials For water-repellent impregnation of absorbent materials Separating film in cast resin applications Advantages and benefits Dry, non-soiling film Highly effective due to good adhesion to prepared substrates Colourless and odourless low-friction coating with non-stick properties Prevents frictional corrosion Dries at room temperature Also available as spray version OKS 571 Operating temperature:-180 °C → +260 °C Press-fit:µ = 0.07 Thread friction (M10/8,8):µ total = 0.10

Hydraulic oil for use in all areas of the food processing technology Compressor oil for screw and multiple vane rotary vacuum pumps at required oil ISO VG 68 Lubrication of other machine elements, such as rolling and friction bearings in the food processing technology Advantages and benefits NSF H1 registered Long operating times through excellent oxidation stability Good low-temperature behaviour Wide operating temperature range Resistant to cold and hot water, water steam, disinfectants and cleaning agents Reduces friction and wear Good corrosion protection Free of mineral oil Conforms to VDL requirements Operating temperature:-40 °C → +135 °C Density (20 °C):0.83 g/ml Viscosity (40 °C):66 mm²/s

Grease lubrication of unsheltered parts subject to heavy loading and/or impacts, such as friction, rolling and pivoting bearings, splined shafts, knockout spindles, threaded spindles and sliding surfaces of all kinds For harsh operating conditions Advantages and benefits Excellently suited as a safety lubricating grease in mixed friction sector with especially good wear protection Effectively protects against corrosion Contains Mox-active to improve performance For best results clean the lubricating point carefully. Clean with solvents like OKS 2610/OKS 2611 Universal Cleaner. Remove the corrosion protection ahead of the initial filling. Fill the bearings in a way that all the functional surfaces for sure get the grease. Slow moving bearings(DN-value < 50,000) should be filled completely, normal moving bearings should be filled to 1/3 of the free inner housing space. Observe the instructions of the bearing or machine manufacturer. Relubrication with a grease gun on to the grease Operating temperature:-20 °C → +130 °C NLGI grade:2 DN factor (dm x n):500,000 mm/min Base oil viscosity (40 °C):185 mm²/s Four-ball test rig (welding load):3,600 N

Jacken mit Logo von HAKRO und TRIGEMA. Lassen Sie Ihr Firmenlogo auf Jacken besticken oder bedrucken. Damen- und Herrenjacken in mehreren Passformen. Schnelle & zuverlässige Lieferung.

The TopWave 266 sets new standards with respect to low-noise operation. The narrow linewidth laser emission typically shows < 0.1% RMS, hence the user benefits from an improved signal-to-noise ratio during measurements. Designed for easy integration the TopWave 266 is a turnkey system which the user can control either via a touch panel at the control unit or using the USB/Ethernet interface in combination with a PC GUI. Due to its high wall-plug efficiency the system can be operated with conduction cooling only. In case no proper heatsinking is possible, a closed loop chiller option is available. The TopWave 266 is ideal for sophisticated measurement and production tasks in e.g. semicon inspection, lithography or Raman spectroscopy. It is a cost-effective and reliable laser that enables the user to concentrate on their application rather than worrying about the light source.

The TA-FHG pro is a tunable, diode-based laser source in the deep UV spectral range. The system consists of an external cavity diode laser, a high power semiconductor amplifier (TA), and two cascaded second harmonic generation stages (SHG pro). Alternatively, it can be equipped with a fiber amplifier (FA) or Raman fiber amplifier (RFA). It provides tunable laser radiation for spectroscopy, laser cooling, holography and interferometry.

The revolutionary TOPO by TOPTICA stands alone as the only fully automated, continuous-wave, singly-resonant optical parametric oscillator laser source on the market. High resolution spectroscopy across 1.45 – 4.0 µm (2500 – 6900 cm-1) has never been easier. TOPTICA’s unique optical design enables broadly tunable laser light. No module or mirror exchange is necessary. Additionally, the all-digital control electronics enable hands-free coarse tuning, and frequency locking. A wide mode-hop-free tuning range up to 300 GHz (10 cm-1) enables visibility of full spectroscopic signatures. Simultaneously, the TOPO maintains a narrow linewidth (2 MHz, 1·10-5 cm-1) giving a solution that reveals narrow atomic and molecular features.

The MDL pro combines up to four narrow-linewidth tunable diode lasers in one compact sub-rack. This solves many problems of modern atomic optics: It simplifies complex operations because all integrated lasers are controlled using only one unified interface. Furthermore, it clears optical tables and stows away the lasers in a 19" standard subrack. This enables researchers to focus on their experiment instead of the laser system. The MDL pro is also transportable which fulfills the need of next-generation AMO systems and supports further compactification and mobilization of state-of-the-art lab-based experiments.

The iChrome MLE comprises up to 3 different diode lasers and one DPSS laser fully integrated in one compact housing. The individual lasers are efficiently combined and delivered via an all-in-one PM/SM fiber output. The microprocessor controlled system enables flexible OEM integration. High speed analog and digital modulation allow fast switching of laser wavelength and intensity.

Having teamed up with some of the leading terahertz research institutes, TOPTICA is able to provide top-quality GaAs and InGaAs photomixers. Both material systems offer an excellent bandwidth and dynamic range. The modules come equipped with a Silicon lens and SM/PM fiber pigtail. The all-fiber design eliminates the need for time-consuming laser beam alignment, and enables an easy and flexible integration into any terahertz assembly.

The TeraFlash pro, a table-top time-domain terahertz platform, sets new standards in terms of dynamic range, bandwidth and measurement speed. Owing to an advanced laser design and progress in photoconductive antennas, the system now achieves a peak dynamic range of 95 dB, and a bandwidth of 6 THz, all within less than 20 s. The highly precise mechanical delay stage enables the acquisition of 60 traces/s @ 50 ps, or 95 traces/s @ 20 ps.

TOPTICA's beat detection consists of two flexible modules: DFC BC and DFC MD. Separating beam combination and beat detection into two units allows for placing them at different locations. The DFC BC and DFC MD units are specifically designed for a combination of the DFC with TOPTICA's DL pro tunable diode laser series, but can also be used with other cw lasers.

Scope of application: -Horizontal installation – suitable for vertical CNC-controlled milling machines -For automation of machining centres – particularly suitable for batch production Product features: -Extreme accuracy for your machining -The clamping force is generated via the pressure from a hydraulic unit with a hydraulic clamping stroke of up to 4.5 mm -The clamping force is steplessly adjusted by regulating the hydraulic pressure on the hydraulic unit. A hand crank is provided for coarse adjustment of the clamping range -The spindle contains a single-acting hydraulic piston and an additional Belleville spring assembly Clamping range S1/mm:0-126 Clamping range S2/mm:91-217 max. clamping force in kN:24 Weight:16,4 hydraulic pressure in bar:240 hydraulic swing:4,5

The Pound-Drever-Hall detector PDD 110/F serves to lock a diode laser to a maximum absorption or transmission of a reference medium (e.g. an optical resonator). The PDD 110/F features an internal HF modulation source for modulating the diode laser frequency. The signal from the reference is detected and demodulated phase sensitively to produce a high bandwidth dispersive error signal that can be used to lock the laser using a PID controller.

Scope of application: -Horizontal and vertical installation – suitable for both vertical and horizontal CNC-controlled milling machines -Lateral installation is also possible Product features: -Extreme accuracy for your machining -The TC vice is ground and polished on all sides -Clamping force can be preset in 11 increments – fine gradations for delicate workpieces. At most, one revolution is required to reach the max. clamping force -Preselectable and reproducible clamping forces enable the workpiece position to be repeated within a tolerance of less than 0.01 mm Clamping range S1/mm:0-182 Clamping range S2/mm:131-313 Clamping force increments:4 max. clamping force in kN:40 Weight:34,8 kg

The DLC pro is a platform driving all tunable diode lasers of TOPTICA: One controller for all wavelengths. The performance of diode lasers is largely determined by its controller. The DLC pro is the first diode laser controller based on a digital foundation, which is essential to obtain the best performance on all key parameters: Low current noise for narrow laser linewidths, excellent temperature control for stable operation and precise piezo control for frequency tuning.

TOPTICA's high-power single-frequency diode lasers are ideal coherent laser sources for a multitude of demanding applications, including lithography, optics test &amp; inspection and holography. These lasers pave the way to manufacture high-quality optics for Augmented Reality (AR), Virtual Reality (VR) or Mixed Reality (MR). For example, ultra-precise optical gratings are easily produced with these laser systems to fabricate hologram projections or holographic safety features.

The Holo-Litho 405 is the ideal replacement for the vintage, power hungry Kr+ gas lasers (406.7 nm and 413.1 nm) commonly used in holographic and lithographic applications. While gas lasers require several kilowatts of electrical power and cumbersome water cooling, the “all‑semiconductor” Holo-Litho 405 draws < 0.08 kW and needs no water cooling to produce similar optical output power. This alone results in a significant reduction in cost of ownership. Furthermore the user also benefits from longer service intervals and lower refurbishment costs. Trained personnel can easily perform on-site replacements of the individual semiconductor field replaceable units, reducing down-time and increasing profitability.

The TA pro is the flagship product of TOPTICAs high power tunable diode laser solutions. Its tapered amplifier technology allows for high power with excellent beam quality, while at the same time maintaining the favorable spectral properties of the pro master laser. The TA pro is a completely revised version of a very well-established laser system, the TA 100. It has been optimized for extreme stability and ease of use, and has proved these properties in numerous tests in TOPTICAs and customers´ laboratories.

TOPTICA’s TeraFlash smart utilizes a proprietary scheme dubbed ECOPS ("electronically controlled optical sampling"). The system comprises two synchronized femtosecond lasers, eliminating the need for a mechanical delay. This results in extremely high measurement speeds: the TeraFlash smart acquires 1600 complete terahertz waveforms per second, enabling terahertz-based thickness gauging at unprecedented speed. The system thus lends itself to measurements on rapidly moving samples, e.g. conveyor belts, papermaking machines, or extrusion lines. Learn more about TOPTICA's advanced terahertz solutions.

The PID 110 is a proportional-integral-differential regulator for frequency stabilization of tunable diode lasers (DL pro, DFB pro). It accomplishes side-of-fringe locking to the slope of an atomic line or a cavity transmission peak. The module works both for HV (piezo actuators) and LV (laser current) control tasks. Users can adjust all relevant parameters, including P, I and D contributions, set point and regulator output range.

Einsatzbereich: -Horizontal und vertikal einsetzbar – somit für vertikale und horizontale CNC-gesteuerte Fräsmaschinen geeignet -Zusätzlich auch seitlich einsetzbar Produktmerkmale: -Höchste Genauigkeit für Ihre Werkstückbearbeitung -Der TC Spanner ist allseitig geschliffen -Spannkraftstufen sind voreinstellbar in 4 Stufen. Mit max. 2 Umdrehungen kann die max. Spannkraft erreicht werden -Vorwählbare und reproduzierbare Spannkräfte ermöglichen Wiederholbarkeit der Werkstückposition mit einer Abweichung kleiner als 0,01 mm Spannweite S1/mm:(0) 17-263 Spannweite S2/mm:187-433 Spannkraftstufen:4 max. Spannkraft in kN:60 Gewicht:67,2 kg

TOPTICA’s TeraScan platforms are well-established “TopSeller” configurations for frequency-domain terahertz spectroscopy. The systems combine mature DFB diode lasers with state-of-the-art GaAs or InGaAs photomixers. The TeraScan 780 offers an outstanding bandwidth, and the TeraScan 1550 sets new benchmarks in terms of terahertz power and dynamic range. Both systems feature TOPTICA's proprietary “DLC smart” control electronics.

TOPTICA's offset-free frequency comb DFC (Difference Frequency Comb) and tunable cw diode lasers (DL pro) can be combined into easy-to-use laser systems delivering frequency-stable cw-output at any wavelength between 420 nm and 2200 nm. A complete laser system contains a DFC CORE, wavelength extensions (DFC EXT), cw diode lasers (DL pro), beat units (DFC BC, DFC MD), all necessary stabilization electronics, a wavelength meter (High Finesse), RF-reference, counter, spectrum analyzer, control server (PC) and user software.

The TeraSpeed serves applications in quality control and process monitoring that require no spectral information, but call for terahertz intensity measurements at “extreme” speeds: the system is capable of detecting individual terahertz pulses at repetition rates as high as 100 MHz. An integrated data-processing unit converts the detected pulses to RMS values, enabling data streams at sampling rates up to 500 kHz – orders of magnitude faster than conventional terahertz systems. Bringing together several cutting-edge technologies, the TeraSpeed takes advantage of mature fiber laser technology, powerful photoconductive emitters and fast yet sensitive Schottky receivers.